Approved Vehicle All Terrain Tactical Assault walker

[Joran Greth]

Image Source:
* Photobucket
* Tumblr
Intent: Make a light assault walker

Development Thread: If Needed

Manufacturer: Aurora Industries

Model: All Terrain Tactical Assault Walker

Affiliation: Aurora Industries customers

Modularity: Sponson mounts

Production: Mass Produced

Material: 9095-T8511 grade durasteel

Role: Light Assault Walker

Height: 9 meters

Weight: 30 metric tons

Minimum Crew: 3

Optimal Crew: 3

Propulsion: Walker

Top Speed: 80 KM/H

Armaments:

* 1 Dual Heavy Blaster Cannons (range: 500m)
* 2 Variable Sponson Mounts

Squadron Count: 4

Passenger Capacity: none

Cargo Capacity: 50 kg

Misc. Equipment:
* Laser Targeting Scope

Description: The AT-TA was a heavily Modified AT-ST which hosted a far stronger frame and drastically increased armor. This made the walker much heavier and slower thanthe scout versions. The chin mounted dual heavy blaster cannons were standard on all variations of the AT-TA. A pair of sponson turrets are mounted on the sides of the re-enforced command structure housing one of the following weapon systems.

* Twin Blaster Cannon Sponson - house two KT6 Heavy Blaster Cannons with an effective range of five hundred meters.
* Single Laser Cannon Sponson - mounted a single DF.9 Laser Cannon with an effective range of two kilometers.
* Dual Repeater Cannon Sponsons - mounted two LS-150 Heavy Accelerated Charged Particle Repeater Guns in an over under configuration. Each was belt feed disintegrating plasma cartridges from a flank mounted magazine which held two thousand rounds each. The weapon had a one kilometer range and a five hundred round per minute rate of fire.
* Immolator Sponson - mounted two CR-28 Heavy Flame Cannons which projected a double cone spread of fire eighteen meters long and twelve meters wide. Each cannon mount housed six canisters each for a total of 300 full cone shots each.
* Ordinance Sponson - mounted a rapid fire RGL-80A electronet grenade launcher with twenty grenades in a rear loading magazine with a range up to one hundred meters. Around it a Variable warhead launcher rack which could hold up to twelve missiles of various types. This launcher had an effective range of two kilometers and could be loaded for a variety of mission profiles.This load out was generally chosen from the following list of available missiles types.

* Concussion Missiles
* Flechétte Missiles


* Incendiary Cluster Missiles

* Carbonite Missiles
* LC-9 Thermite Torpedo

 

[Ellie Mors]

<p>RESEARCH REVIEW<br /> <br />Star Wars Canon:<br />Pending initial review<br /> <br />Starwars Chaos: <br />Pending initial review<br /> <br />WITHOUT DEV THREADS<br />Pending initial review<br /><br />WITH DEV THREADS<br />Pending Initial review<br /><br />SUGGESTIONS<br />Pending Inital review</p>

 

[Ellie Mors]

* Single Laser Cannon Sponson - mounted a single DF.9 Laser Cannon with an effective range of two kilometers.

Which of the DF.9 Laser cannons are being used here?

CR-28 Heavy Flame Cannons which projected a double cone spread of fire twenty meters long and fifteen meters wide

Shoots a large cone of fire 18 meters long and 12 meters wide at the terminus[1]
http://starwars.wikia.com/wiki/Model_CR-28_flame_cannon

I don't mind adding a bit of ammunition in weapons, but an extra 2x3 meters is a bit much for the addition of a canon item that already has defined parameters. Please keep this in line with canon or utilize another piece of equipment.

 

[Joran Greth]

The extra was from the fact the there are 2 cannons firing simultaniouslly ill change it but felt twin cannons would complement each other as well as a stationary vehicle mount rather than being hand held


[member="Bianca"]

 

[Joran Greth]

The df 9 is just the single mount verson used on the droid tank

 

[Joran Greth]

[member="Bianca"] I edited the flame cannons to match wiki ranges

 

[Ellie Mors]

Awesome. Pending Admin Approval. Thanks! [member="Spencer Jacobs"]

 

[Allyson Locke]

Approved.