Arumi Zy
Jekyll
Image Source: http://uncannyknack.deviantart.com/art/Deathstroke-376894488
Intent: To create a powerful prototype armor that will be able to give desirable protections in close quarters and longer range engagements.
Development Thread: If Needed
Manufacturer: ZyTech
Model: CHAOS ( Complete Heavy Assault Offensive Suit)
Affiliation:Classified
Modularity:NO
Production: Semi-unique x3
Material: Artherian Micrmesh, Adamanthium, Synth Rubber, Leather
Classification: Multipurpose
Weight: 16.5 KG
Quality: Tier 3 Covered Areas 9, Tier 2 Covered 7 , Tier 1/1.5 covered areas(Joints, Thin Weaved) 3
Special Features: Micrmesh Body suit, Adamanthium Plates, Synth Rubber Points,
Description: CHAOS is a very expensive prototype suit that has been created for a mysterios and anonymous client. The armor was created with extreme protection and resilience in mind while still allowing the owner to retain their ability to fight with their preferred method of combat. The suit is heavy and it has a negative impact on mobility but makes the trade off for added protection and defense. This armor was designed for someone who has a heavy and very aggressive combat style.
CHAOS consist of three separate Tiers of armor, each one providing its own defense layering. The first layer is the standard body glove, a synthetic rubber like compound that fits skin tight on the body and helps to shield the wearer against radiation and regulate body temperature It has flecks of Cryonium in it to help with the Radiation shielding. This one piece suit is put on by pulling the neck as wide as possible and stepping into it, slowly working the glove into position. An experienced use can be fully gloved in a little over a minute.
The Second Tier of the armor is the Artherian MicroMesh Hard Body, several pieces of armor composed of hardened layers of Artherian Micromesh to constitute solid pieces of armor that have between 1 to 3 pockets in between the first and second layer to allow armor plates to be inserted. The Hard Body armor is made of 22 individual pieces that strap together to make one full suit of armor.
The First Piece of the Hard Body Armor is the Breast Plate, it is placed on first. Followed by the Back Plate, which straps together and cicnhes at the sides. Followed by the Shoulder guards, which attache on top of the Chest Plate and connects to the Bicept Guards which creates the shoulder joint. The joint has a small gap where the components overlap with a thin layer of MicroMesh in order to create a joint capable of movement without overtly affecting agility and mobility. Extending from the end of the MicroMesh Hard Body Bicept is a thin layer of Micromesh that attaches to the forearm guards and protects the elbow while allowing full range of motion. This thin layer won't deflect much but it offers minimal protection to protect full range of arm motion in saber combat. The Forearm Plates connect to the Thin Layer from the inside and has two straps that extend up to the Bicept Guards to Attach,
The Waist/Buttox Guard is the next piece, it comes in two pieces and is placed on the body in the same manner as the Torso Guard. The Groin Piece is placed on first, followed by the Buttocks guard which snaps together with the Groin Piece and cinches to create on piece of gear. This piece provides no Thigh protection but protects the Groin and Buttocks. The Next piece is the Thigh Guard which a short run of Micromesh on one end of the hard Body Micromesh, and a piece that has a Long run of Micromesh on the Hard Body. The Short Section attaches underneath the Waist Guard and leaves a gap of several centimeters between the Waist Guard Hard Body and the Thigh Hard Body leaving a section only protected by the thin layer of weave to preserve more range of motion and agility while leaving minimal area exposed.
The Long run of Micromesh covers over the knee and connects to the final piece of the Hard Body Armor the Shin/Calf Guards. The Shin and Calf Guard is put on and cinched and connected beneath the Calf/Shin Guards. It offers minimal protection to the knees but helps the wearer to retain mobility and agility. The Hard Body Shin/Calf Guard ends mid Calf to allow room for Combat Boots.
The Third Tier of the CHAOS armor is a series of Adamanthium plates that serve to protect vital areas and provide the user as much protection as possible while trying to keep weight down to a manageable level. The Plates are recommended to be inside of the Hard Body Armors pockets before it is put on as they are extremely difficult to acess and replace once the armor is on and assembled. There are Twelve plates in total, Three that protect the Heart, Lungs and Stomach of the user inside of the Breast Plate, One of the Back that protects the Heart and lungs.
Each Limb has two plates, the Arms have a Bicept and Forearm Plate that protects the front portion and half of the side portions ending a few centimeters from the each joint. The Leg plates consist of Thigh and and Shin plates that mimic the arm plates in design and function. This allows the user to defend better against a frontal assault, keeps weight to a manageable level and helps preserve some mobility and agility that would be lost if those plates had rear components.
Im a Programmer not an Artist so i hope this helps a bit with visualization.
MicroMesh Hard Body Tier 2 Concept Art, Curtosy me
Tier 3 Adamanthium SAPI, Courtesy me
Player Sources:
Atherian Micromesh
Adamanthium
Cryonium
Intent: To create a powerful prototype armor that will be able to give desirable protections in close quarters and longer range engagements.
Development Thread: If Needed
Manufacturer: ZyTech
Model: CHAOS ( Complete Heavy Assault Offensive Suit)
Affiliation:Classified
Modularity:NO
Production: Semi-unique x3
Material: Artherian Micrmesh, Adamanthium, Synth Rubber, Leather
Classification: Multipurpose
Weight: 16.5 KG
Quality: Tier 3 Covered Areas 9, Tier 2 Covered 7 , Tier 1/1.5 covered areas(Joints, Thin Weaved) 3
Special Features: Micrmesh Body suit, Adamanthium Plates, Synth Rubber Points,
Description: CHAOS is a very expensive prototype suit that has been created for a mysterios and anonymous client. The armor was created with extreme protection and resilience in mind while still allowing the owner to retain their ability to fight with their preferred method of combat. The suit is heavy and it has a negative impact on mobility but makes the trade off for added protection and defense. This armor was designed for someone who has a heavy and very aggressive combat style.
CHAOS consist of three separate Tiers of armor, each one providing its own defense layering. The first layer is the standard body glove, a synthetic rubber like compound that fits skin tight on the body and helps to shield the wearer against radiation and regulate body temperature It has flecks of Cryonium in it to help with the Radiation shielding. This one piece suit is put on by pulling the neck as wide as possible and stepping into it, slowly working the glove into position. An experienced use can be fully gloved in a little over a minute.
The Second Tier of the armor is the Artherian MicroMesh Hard Body, several pieces of armor composed of hardened layers of Artherian Micromesh to constitute solid pieces of armor that have between 1 to 3 pockets in between the first and second layer to allow armor plates to be inserted. The Hard Body armor is made of 22 individual pieces that strap together to make one full suit of armor.
The First Piece of the Hard Body Armor is the Breast Plate, it is placed on first. Followed by the Back Plate, which straps together and cicnhes at the sides. Followed by the Shoulder guards, which attache on top of the Chest Plate and connects to the Bicept Guards which creates the shoulder joint. The joint has a small gap where the components overlap with a thin layer of MicroMesh in order to create a joint capable of movement without overtly affecting agility and mobility. Extending from the end of the MicroMesh Hard Body Bicept is a thin layer of Micromesh that attaches to the forearm guards and protects the elbow while allowing full range of motion. This thin layer won't deflect much but it offers minimal protection to protect full range of arm motion in saber combat. The Forearm Plates connect to the Thin Layer from the inside and has two straps that extend up to the Bicept Guards to Attach,
The Waist/Buttox Guard is the next piece, it comes in two pieces and is placed on the body in the same manner as the Torso Guard. The Groin Piece is placed on first, followed by the Buttocks guard which snaps together with the Groin Piece and cinches to create on piece of gear. This piece provides no Thigh protection but protects the Groin and Buttocks. The Next piece is the Thigh Guard which a short run of Micromesh on one end of the hard Body Micromesh, and a piece that has a Long run of Micromesh on the Hard Body. The Short Section attaches underneath the Waist Guard and leaves a gap of several centimeters between the Waist Guard Hard Body and the Thigh Hard Body leaving a section only protected by the thin layer of weave to preserve more range of motion and agility while leaving minimal area exposed.
The Long run of Micromesh covers over the knee and connects to the final piece of the Hard Body Armor the Shin/Calf Guards. The Shin and Calf Guard is put on and cinched and connected beneath the Calf/Shin Guards. It offers minimal protection to the knees but helps the wearer to retain mobility and agility. The Hard Body Shin/Calf Guard ends mid Calf to allow room for Combat Boots.
The Third Tier of the CHAOS armor is a series of Adamanthium plates that serve to protect vital areas and provide the user as much protection as possible while trying to keep weight down to a manageable level. The Plates are recommended to be inside of the Hard Body Armors pockets before it is put on as they are extremely difficult to acess and replace once the armor is on and assembled. There are Twelve plates in total, Three that protect the Heart, Lungs and Stomach of the user inside of the Breast Plate, One of the Back that protects the Heart and lungs.
Each Limb has two plates, the Arms have a Bicept and Forearm Plate that protects the front portion and half of the side portions ending a few centimeters from the each joint. The Leg plates consist of Thigh and and Shin plates that mimic the arm plates in design and function. This allows the user to defend better against a frontal assault, keeps weight to a manageable level and helps preserve some mobility and agility that would be lost if those plates had rear components.
Im a Programmer not an Artist so i hope this helps a bit with visualization.
MicroMesh Hard Body Tier 2 Concept Art, Curtosy me
Tier 3 Adamanthium SAPI, Courtesy me
Player Sources:
Atherian Micromesh
Adamanthium
Cryonium
