Valdus Bral
️ Clan Bral Alor ️| Warlord of Nellogant
OUT OF CHARACTER INFORMATION
After the creation of Bral Metal & Engineering (BM&E) and after the Invasion on Eshan, Valdus decided that due to the amount of droids and large beasts present that his previous wrist-mounted side-arm was far too lacking. He set about creating a way to introduce a heavy duty disruptor into the design. By removing one of the modified DC-17 heavy blaster pistols from the design and creating a specialized housing with greater internal volume, Valdus was able to fit in a disruptor design nearly forgotten to the ages: the Mandalorian Disintegrator. While this weapon was once the pinnacle of the available Disruptors , it has likely been replaced. However, the Mandalorian Disintegrator is still a capable design with the ability to cause massive amounts of damage and a slow, painful death. Valdus altered the original design to also include an overcharge function which enables the DC-17d MK. II to consume half of its maximum amount of ammunition in order to release a disruptor bolt so powerful it can shutdown very large vehicles, very large starfighters, very large droids. Additionally, the charged shot can instantly disintegrate standard humanoid targets and cause rapid progressive disintegration in very large organics. While the DC-17d MK. II is an overall upgrade in the previous design, it comes at a cost of increased weight, reloading difficulty, and overall slower rate of fire over the DC-17t.
- Intent: To update and upgrade the DC-17t with Disruptor capabilities.
- Image Source: N/A
- Canon Link: Mandalorian Disintegrator
- Primary Source: DC-17t Wrist-Mounted Blaster
- Manufacturer: Bral Metal & Engineering
- Affiliation: Valdus Bral , Bral Metal & Engineering (BM&E), Closed-Market
- Model: DC-17d MK. II
- Modularity: No
Production: Limited
- Material: Dallorian Alloy, Beskar, Mandalorian Disintegrator components, DC-17 components, control components, and wrist mounting components.
- Classification: Blaster & Disruptor
- Size: Large
- Weight: Very Heavy
- Ammunition Type: Power Cell & Gas
- Ammunition Capacity: Power Cell: 50, Gas Canister: 50
Reload Speed: Very Slow
- Effective Range: Average
- Rate of Fire: Disruptor - Very Low, Blaster- Average
- Stopping Power: Disruptor -Extreme, Blaster- Average
- Recoil: Average
- This model has the ability not only to fire either a blaster bolt or a disruptor bolt at a target, but it can do so both at once, or alternate fire.
- This model has the ability to overcharge the disruptor half of the weapon, which takes half of the ammunition, but can disintegrate an organic being instantly [ X ].
- This model is made out of beskar and dallorian alloy, allow for a large amount of heat resistance, as well as kinetic, lightsaber, and blaster resistance.
- This model is mounted on the wrist and can be fired hands-free by the user clenching their corresponding fist for an extend amount of time.
- Disruptor: This weapon utilizes disruptor technology that can begin disintegration of organic beings on contact, temporarily shutdown vehicles, starfighters, and droids.
- Charge Shot: This weapon can have the disruptor half become overcharged, by overcharging this weapon the disruptor bolt is amplified to a devastating effect that can instantly disintegrate standard humanoid sized organics, or rapid progressive disintegration of large organics, and shutdown large vehicles, starfighters, or droids.
- Beskar: High resistance to kinetic, lightsaber, and blaster damage to the external parts of this item.
- Long Reload: This weapon is not designed for extended use, it is a side-arm with very low ammunition count, and is not designed for rapid-reload.
- Slow Fire: The disruptor mode of the weapon has a very slow rate of fire and may only get off one or two shots per post. There can only be one shot fired from the device in general if the overcharge is active on the disruptor.
- Very Heavy: This weapon was not made for standard humanoids, it is very heavy, very durable, and very awkward to those not in the upper tiers of strength or using a powersuit capable of using very heavy weapons.
After the creation of Bral Metal & Engineering (BM&E) and after the Invasion on Eshan, Valdus decided that due to the amount of droids and large beasts present that his previous wrist-mounted side-arm was far too lacking. He set about creating a way to introduce a heavy duty disruptor into the design. By removing one of the modified DC-17 heavy blaster pistols from the design and creating a specialized housing with greater internal volume, Valdus was able to fit in a disruptor design nearly forgotten to the ages: the Mandalorian Disintegrator. While this weapon was once the pinnacle of the available Disruptors , it has likely been replaced. However, the Mandalorian Disintegrator is still a capable design with the ability to cause massive amounts of damage and a slow, painful death. Valdus altered the original design to also include an overcharge function which enables the DC-17d MK. II to consume half of its maximum amount of ammunition in order to release a disruptor bolt so powerful it can shutdown very large vehicles, very large starfighters, very large droids. Additionally, the charged shot can instantly disintegrate standard humanoid targets and cause rapid progressive disintegration in very large organics. While the DC-17d MK. II is an overall upgrade in the previous design, it comes at a cost of increased weight, reloading difficulty, and overall slower rate of fire over the DC-17t.
