Star Wars Roleplay: Chaos

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

I guess you can call it MJOLNIR Armor [solo]

Fondor

Finally, the last ingredient to create not just Canal's armor, but Calico's, Keziah's and Ori's was already in their hands after a mining mission from the icy planet of Arkania. Now that they had phrik, a precious ore that was the last material needed for the armor they could begin creating the helmet, the armor and put the components in them. When the armor was created it would make its user an invaluable soldier and a super soldier. Because of this, it was highly classified and only trusted military officers, military scientist, and the users of the armor could know of it and be present of its creation.

"Talk to me, Doctor," the clone captain said to a scientist who was supervising the production of the armor.
 
"Captain," the head scientist said to Canal. The man looked like he was in his sixties, had a beard, and had a huge forehead. He was one of the best scientist that the Protectorate had and was an invaluable one. "Well, thanks to your successful mining operation on Arkania we have now began to construct the armor that was requested by you. And we have the rest of the material that will be combined with the armor since you listed down everything on the 'wish list' you gave to us. We have four echani shields which we requested to the Lord Protector and admirably gave it to us and the agrinium. The rest of the tech will be the components for the armor," and finished off his sentence with a nod to the clone.
 
Good. Everything was going well as planned. No delays, detours or dead ends. "Very well, Doc. Now, I want to ho over the set of armor that we're making. Let's go over with my wife's armor. She requested a Beskar'Kander, which is heavy armor for you to understanding. So, it has to be super durable, really heavy, and you know the rest. And the others, just make them balanced, nothing too thick. Ori's is a special order out of the rest." The captain replied back to the scientist. He already had the blueprints on how the image of the armor would look like.
 
"Very well, it will take about a week to create the armor. One of the reasons is because we want to perfect it so no malfunctions will occur whenever it is being put to use," the doctor said to the clone. "Also, I saw that you want to modify the echani shields that we currently have. What modifications would you like us to put on it, captain?" Awaiting for an answer to his question.
 
"Yes," the clone captain began, "a modification I want to the armor rather than the shield is that I want a way to conserve the time on the shield. It would be similar to the Mk II/H Battle Armor, with the shield as a constant shield activated at all times; however, I want there to be a way to shut down the shield whenever it is not being used or whenever the user wants to conserve the remaining time of the shield." He gave the scientist his answer and waited for his reply to his statement.
 
"Very well, Captain. In a week or less than that the armor will be created and it'll be tested to make sure it is suitable for battle. Once those procedures are completed the armor will be given to you and the others which will serve you well into battle. Now, if you'll excuse me I have a project to complete," the the head scientist told him and turned around and headed towards the conference room, where he and another group of scientist and engineers would be discussing about the design and components of the set of armor to make it suitable, durable, and effective for its users.
 
After the engineers and the scientists discussing the components and materials for the armor they finally had an official blueprint on how the different types of armor would be built. And once the blueprint was approved by the supervisor they began constructing the armor. They began forging the armor with the materials that would make the appearance of it. With their machines and tech they twiddled with the phrik and agrinium and made the phenotype of the armor.

The workers then grabbed a lightsaber and struck at the four different types of armor just to make sure a single hit of a saber couldn't penetrate the armor. The armor successfully deflected off the hit which meant they could skip shooting at the armors with slugthrowers and blasters. Once that phase was completed they began to move on making the components for both the armor and the helmet.
 
Somewhere during the week the engineers, scientists, and the other workers that were involved in the project began putting the components for the armors that would make it more than just a bucket full of a lightsaber resistant metal with the body glove and agrinium beneath it. They put in all the standardized components such as HUD, infrared, thermal, and night vision, the oxygen filtration system, etc. The armor was simple but they invested more time in it as they were putting in the echani shield that would make it another tough layer for bolts, and slugs to penetrate and for the re-entry tech whenever the user would be heading planet side through space, and the anti-gravity tech so the user doesn't break any bones or have any injuries whenever it impacts the ground. Unlike the Mk II/H battle armor they twiddled even more to make the shield go offline whenever the user commands it to so it could conserve some time and energy of the echani shield whenever it is not being used.

When they were finished with the shield they hired a tester to try on the suit of armor and see if the new component worked or not. They shield was on the clock and was using its energy that it had within it. A scientist then grabbed a slugthrower and began firing at the armor. The hardened shield succeeded in protecting the suit of armor and then the same scientist put down the slugthrower and picked up a blaster rifle. Once again, the shield protected the armor from the bolts and there seemed to be no scorch marks on the suit. The supervisor then ordered the tester to command the armor to shut down the shield to save the remaining time on it. Following his orders the tester commanded the armor to turn off the shield to conserve the remaining time in it and what did you know? The component succeeded in conserving the echani shield.

While it did seem appropriate to go home and mark this project a success they still needed to test out the two remaining components: the re-entry tech and the anti-gravity tech.
 
They only had two days left to give the armor the official approval so it could be utilized by its users for combat and war. They only had the re-entry tech and the anti-gravity components to give the armor. The anti-gravity tech was much more easy than the re-entry tech for they only had to construct an anti-gravity belt which would allow the user to rise many meters above the ground so it could be used for simulate flight and before impacting the ground from re-entry.

Now that they had constructed the anti-gravity belt they focused all their attention on the re-entry tech. It was the only component left for the armor. The engineers and scientist began brainstorming, drawing out ideas on the whiteboard, analyzing different materials that could resist high velocity impacts and high gravity force. After evaluating their research and ideas they came down with one answer that could solve the obstacle that they were facing: hydrostatic gel. This would not just only be useful against high velocity impacts and high gravity forces; but to regulate the temperature inside the armor. Plus, it could change the density to conform the the wearer's shape. But the gel would only be for the body glove that would be underneath the armor plates and the gel would be above the body glove. In this case the gel would be sandwiched by the body glove and the armor plates as the gel would be a layer for the body glove suit.

After solving this solution for hours and the staff of engineers and scientist finally applied their solution to the armor. They had made a spare of the four armors just for test purposes. They first tested the anti gravity unit and to see if the unit they let it drop to the ground with an actual living being inside of the armor. Before the tester could land on the ground with an impact that could've hurt him he activated the unit which made him rise a couple meters above the ground and then the armor continued falling to the ground and finally landing on it with both feet. Since the tester had decelerated with the anti gravity unit the impact was not as hard as it would have been if it wasn't thanks to the unit.

Now that the anti gravity unit was at their taste of satisfaction they would now test if the armor was suitable for re-enrty. If their calculations were correct and the gel could resist against the heat from the high velocity due to entering the atmosphere then project MJOLNIR would be accomplished and the armor would be confirmed to be used in war.
 
Up high in orbit, outside the atmosphere of Fondor and in space was the FLEETCOM station orbiting the planet, along with other star ships and stations that were the defenses of the Capital of the Omega Protectorate. There, inside of the station were a ton of Protectorate personnel and one of the MJOLNIR armors that the scientists and engineers were working on. In a few moments the armor containing a volunteered stunt performer would be launched out of the station, and would head towards the surface of Fondor. They had hope that the hydrostatic gel would protect the man from getting roasted and fried within the armor due to the high velocity that would make a high degreed heat that could kill any organism in mere seconds.

After receiving the "OK" signal from the supervisor that was on the planet's surface the stunt man then jumped out of the hangar bay of the FLEETCOM station and was diving towards Fondor with no gravity to take him down, and only relied on his momentum to bring him closer to the atmosphere of the planet, so gravity would pull him down at a high velocity with a high acceleration. After moments of being in the space and trying to reach Fondor's atmosphere the man finally began the re-entry stage for the project.

Gravity started to pull towards the man once the stunter was in a area of the atmosphere. As soon as that happened the acceleration began increasing the free fall's velocity. At the same time there was high temperature heat around the suit of armor and smoke began to trail off from the diving of the man. The hydrostatic gel then began to manipulate the temperature within the armor to have a stabilized temperature for the man inside of the suit of armor not be killed from the heat that was happening due to the high velocity of the free fall dive.

While the gel was protecting the volunteered man of getting fried from the heat he still needed to activate the anti-gravity to prevent him from crashing into the ground and getting broken bones and death from the crash land. After being a couple feet from the ground (less than or equal to 200 feet) the anti-gravity unit activated and the velocity of the fall decelerated, thus, making the man in the armor float through the air while still descending towards the ground in a slower velocity than the previous one.

Due to the success of the antigravity unit, the hydrostatic gel that protected the volunteer from the heat that could've killed him, and the other components and materials that were required and used for the set of armor the supervisor, along with the chosen staff for the unique military project, they could finally call the project a total complete success, and take a huge long break for their hard work that they put into the armor.
 

Users who are viewing this thread

Top Bottom