Approved Tech SR-1

[Labkahip Mordulla]

Shard Rifle Mark 1​

OUT OF CHARACTER INFORMATION

• Intent: A conversion of the DC blaster rifle to slug-thrower for the open market weapon that can serve as a light support weapon and self loading rifle.
• Image Source: NA
• Canon Link: NA
• Restricted Missions: NA
• Primary Source: DC-15A, Bren LMG

PRODUCTION INFORMATION

• Manufacturer: Mordulla Manufacturing
• Model: SR-Mk1
• Affiliation: Labkahip Mordulla Mordulla Manufacturing, Open-Market
• Modularit: Yes, 3xscope/Iron sight, front mounted bi-pod/forward hand grip/no grip
• Production: Minor
• Material: Dursteel, electrical components, slug thrower components, blaster components

TECHNICAL SPECIFICATIONS

• Classification: Slugthrower/Blaster
• Height: 29 cm (without mag), 10 cm (with mag)
• Length: 127.9cm
• Weight: 9.75kg(empty), 10.37kg(30 round mag), 12.35Kg (100 round mag)
• Ammunition Type: Custom rear explosive slugs, power pack
• Ammunition Capacity: 30 single round mag/100round LMG mag, 500 plasma cartridge DC series power pack.
• Effective Range: Sniper Varient-1760 meters, LMG varient-550 meters
• Rate of Fire: Semi-auto/self loading-50 round per minute, fully auto-490 round per minute

SPECIAL FEATURES

• Can be modified easily for current taslk

Strengths:

• Provides a versatile weapon for multiple uses
• Easy to fix a maintain as it due to conversion parts
• Explosive round make the weapon perfect for clearing out people behind over or in confined spaces
• Good against light and medium armor
• Good against light sabers

Weaknesses:

• Not useful for close quarter engagements
• Over heats if used used to often
• Water can cause it to short out
• Heavy armor
• Has to use two type of ammo for proper function

DESCRIPTION
The Shard Rifle is a conversion of the famous clone wars DC series blaster rifle that adds a slug throwing mechanism to it while keeping its blaster firing components. The rifle works by similar to a cycle rifle but instead of coating the slug in energy and firing it, the rifle concentrates all the energy at the back of the slug via firing a slightly delayed blaster bolt, causing a tracer like effect. The rifle also comes supplied with custom made shatter round which have an explosive rear which detonates upon impact.

This exploding round works via the kinetic energy built up in the back of the slug (from the blaster round) hitting a primer which causes the rear shard filled end of the slug to explode outwards. This shattering at high speeds sends the shards in the slug outwards causing harm to those in the immediate area while still delivering the majority of the slug into the intended target.

 

[Yaadri Osi-Yyn]

Hello, I'll be the factory judge reviewing your submission. If you have questions, please feel free to respond to this thread once we are underway.

 

[Yaadri Osi-Yyn]

Firstly, as you state this is a blaster rifle. There are a few edits that need to be made:

Ammunition Type: Bullets andcustom round

Blasters do not use bullets. The ammunition type should be 'Power cells' and 'Gas canisters'.

Ammunition Capacity: 30 single round mag/100round LMG mag

Simply change mag to power cell here.

We can continue once this is done.

[member="Labkahip Mordulla"]

 

[Labkahip Mordulla]

It is not a blaster rifle, it is a conversion to a slug-thrower that still incorporates the blaster components to coat the slugs with energy so it can perform the splinter function.

[member="Venthis Zambrano"]

I've edited a few things on it though to make that a bit more clear

 

[Yaadri Osi-Yyn]

After consulting with some other Factory Judges we have come to the conclusion that this submission would not be possible in it's current state. It is possible to coat a slug in energy upon, or just prior to, firing it through the barrel of a slugthrower, but post-firing it is not possible to coat the remnants of a slugthrower round in energy by colliding a blaster bolt and a slugthrower together. Hybrid slugthrowers are an entirely different technology from blasters, albeit similar.

I would suggest that you alter this so that the slugthrower round is either partially or entirely encapsulated by energy, as a hybrid slugthrower would do, and utilize explosive rounds to receive the desired effect. Placing a charge on the rear-end of the slug and using the bolt as ignition, is a good alternative.

Encapsulating the shrapnel with energy after-the-fact, however, is not possible.

[member="Labkahip Mordulla"]

 

[Labkahip Mordulla]

Okay I'll change that, but would it still be possible to keep the splintering effect of the slugs? [member="Venthis Zambrano"]

 

[Yaadri Osi-Yyn]

Yes, if you were to do as I suggested. Have the slug have some form of explosive on the end, and upon impact it explodes causing the slug to give the desired effect.

[member="Labkahip Mordulla"]

 

[Labkahip Mordulla]

I'll get to that a bit later, though that was my original plan, but I thought I'd have to submit a custom made round for the gun [member="Venthis Zambrano"]

 

[Yaadri Osi-Yyn]

As long as you explain it enough here, and go into a good ammount of detail then it'll be fine.

[member="Labkahip Mordulla"]

 

[Labkahip Mordulla]

changed [member="Venthis Zambrano"]

 

[Yaadri Osi-Yyn]

Awesome. Pending Factory Mentor Review.

[member="Jamie Pyne"] [member="Raziel"] [member="Darth Ananta"]

 

[Ellie Mors]

Reviewing

 

[Ellie Mors]

[member="Venthis Zambrano"] [member="Labkahip Mordulla"]

Ammunition Capacity: 30 single round mag/100round LMG mag

Please include the power pack's capacity.

 

[Labkahip Mordulla]

[member="Darth Ananta"] updated

 

[Ellie Mors]

Awesome. Pending Admin Approval. Thanks! [member="Cira"]

 

[Cira]

Approved.