Bryanjar Aulfmaor
Character
OOC: I am drugged up on medication to help me recover, my grammar will be off, secondly I put some humorous things in the thread to hopefully lighten up the mood.
Production of armor :Mandal Hyperpernautics (uniquely built armor)
Topic: Blue print
Author : Bryanjar Aulfmaor
Beskaram, a daily part of life , for mandalorians , many have always desired to earn the right of wearing armor. After proving himself, in Agmar, Alderaan , and many other countless adventures already complted by this young lad he finally earned his right to wear armor. This was an honor, an honor that would not be taken lightly, the mechanic would get to work, using his knowledge with simple mechanics of ship armoring, and droid armoring in an attempt to make , his beskaram . The design would be simple , his Bucye, or helmet would be full beskar,would contain oxygen filtering, and a comm. His neck would contain beskar chain-mail , in order to allow mobility and some protection, and the ability to take his helmet off without a fuss. Leather would be insulated throughout the body in a form of red cloth interweaving the suit together, these cloth weaves would also have black fabric were the plates would be put inside and secured y durasteel clamps to permanently keep the plates there forever. This was essential to the armor, which would allow for there to be evenly distributed beskar plates in this slots for the armor. There would two chest plates , one for the right pectoral part of the chst and one for the left, allowing for a seperate small seam , the black fabric, to separate the two chest pieces. This would protect the chest muscles and only have a small crack of exposure for the enemy to hit , a blaster , or lightsaber may not be able to do enough damage with such a tight seam, but a thin dagger, or dart could . These were problems that would be unacceptable to the sniper . The purpose of the seams were to allow mobility , and breathing space for the body, giving the warrior the ability to react faster, move faster, and have insulation for temperature.
The most important thing for a sniper was to have air to breath, in order to mask the fluent movement of his rifle , and have perfect breathing for the shot. Not only this , a sniper needed to be exceptionally calm, and less distracted, with insulation; heat, or extreme weather would never get in the way of the snipers ability to move or breath when aiming. This was a smart decision with the small trade back that a knife , or a dart could get through such a small seam, a sniper , a good sniper during combat , usually never had to worry about blow darts or knives, the only targets that could be a problem, where the exceptionally few elite footmen that could get close, the force users, counter snipers, and heavy armored vehicles. A majority , not using the knives or blow darts. While as a bounty hunter this may be a different story, the keshian had eye sight , and athleticism on his side to combat this simple set back. The next place would be the protect of the collar bone area , and the protection of his traps, both important groups of the shoulder. The collar bone would be protected like the neck was, with beskar chain mail, while weaker then plate beskar, it gave the same protection of a energy attacks, but the kinetic force still would be enough to break a bone , the main purpose was to provide even protection and allow mobility so the sniper would not get hit in the first place. Unfortunately this was the best way to go in order to provide this , and follow the combat style of Bryanjar. The traps , on the other hand would be protected like the chest was, with beskar plating of medium thickness, these plates would completely cover the area. Therefore covering the largest group of the shoulder rather then the inside parts of the shoulder closer to the neck which only would be protected by beskar chain mail.
The next area, would be the abdominal area (stomach) , the lower and upper portions of the abdominal area would be protected by a single beskar plate cover a majority of the area, this plate would be of medium thickness as well. The abdominal area, according to research is a prime target , for any combatant, thus instead of having to separate area's like the larger ventral(front) chest area, a beskar plate of medium thickness, and wider length was made to remedy this problem, underneath is the same type of Technic used that the chest plates where placed in. Consisting of a border between the chest area's , and abdominal area's was the black sports fabric, where it again, was a small seam bordering the two different areas. The fabric is durable, but should be cleaned and repaired frequently . This is not a problem as fabric can be found on most planets and morphed for the purpose of serving the armor's needs. This design , contemptuously put together, helps a sniper have breathing capabilities and mobility capabilities with rather then fully plated beskarams.
When one looks at the arms , this is one of the greater weaknesses when it comes to the protections of the individual , but also gives greater mobility to the wearer, red fabric , coated with only leather to protect the individual surrounds the area of the tricep , bicep , this frequently shows off the muscular arms, and size of the warrior , Bryanjar Aulfmaor . Which gives an intimidation factor to any unfortunate bounties the hunter may be after, while also giving mobility, this area of the arm is interwove into the chest piece and is separate from the forearms piece and gauntlets. This joint separation is necessary as to give a way to help dismantle the armor after battle, there is no protection to blaster fire, or lightsabers in this area, only to shrapnel. The next part, the forearms and onward, is a beskar gauntlet , completely beskar, these areas require great athleticism of the hands , and forearms to move the fingers in the gauntlet with lubrication, but in emergencies can be done by the wearer this armor is designed for, if need be. Not only is there ultimate protect in the medium thick piece of beskar making, there are beskar knuckles, designed to be used as a punching weapon should the occasion need be. With brute force, and athleticism, these knuckles can definitely pack a punch to injure , and in certain areas, kill.
Moving back toward the areas near the abdominals is the area beside it, the armpit and down to the hips, the hips have no protection, and so does the armpit area and between, this is to allow mobility and more breath air, and to allow more speed for the combatant. Behind in the intra-scapular areas (middle parts of the upper back bordering the spine) , scapular areas (upper portion of the back) , medial(middle) portions of the scapular, and the lumbar area of the back ( lower back ) are covered by a single medium thick beskar plate. the borders all around are surrounded by the fabric already spoken about.
Now that the process is understood by previous explanations of the upper part, details will be shortened in order to save document space of this file. The quads of the legs and shins will contain beskar plates of medium thickness with the fabric bordering a beskar knee cap for mobility and protection. This allows mobility in the legs while also allow maximal protection of the entire leg except for the seams. The ankles will not be protected allowing mobility and the ability for the wearer to take off the beskar combat boots that will also be apart of this beskaram. Moving forward, the beskar armored boots will be shaped after the famous neocrusaders design for combat wears of the feet , the difference being completely beskar , and less comforting as theres only a small fabric coating insulated inside for comfort. Moving to a more , sexual region of the lower body, the testicles and penis will be protected by a beskar cup, the cup will need to be custom made, due to the size of the individual , in order to allow comfort , and to not cut off bloodflow which would cause urinary problems from the normal size. This cup is visable , while it would be cheaper fto not add this design , the author simply needs protection there like any other part.
The calfs , and hamstrings will also receive as much protection, as the ventral side of the leg has , with a border seperating them of the fabric. The glutenous maximums will not receive any protection , this is to relieve the pressure of all the plating on the legs and to allow for a safe fabricated area in order to pull the lower portion of the armor down after combat. While this beskaram may have many weakness's , there are many strengths that will be issued to the wearer's style in combat , strong, explosive, agile , and constantly moving, when in close quarters. While also serving the purposes of being stationary while fighting afar.
------------------------------------------------------------------------------------------------------------------------------------------
Location : Tatioone, in the isolated dry climate by an abandoned moisture farm.
Bryanjar called the crazy mandalorian knight, a vod during the battle , and practically family. The two of the would lightly spar, to test the armor. The warrior waited , eager to test his gear, and to see how it would fair, if this went well, he would send it back to the company to perfectly build a model of his cosmetic desires , after testing his metal in combat, he deserved this victory, and boy would the keshian enjoy it.
Production of armor :Mandal Hyperpernautics (uniquely built armor)
Topic: Blue print
Author : Bryanjar Aulfmaor
Beskaram, a daily part of life , for mandalorians , many have always desired to earn the right of wearing armor. After proving himself, in Agmar, Alderaan , and many other countless adventures already complted by this young lad he finally earned his right to wear armor. This was an honor, an honor that would not be taken lightly, the mechanic would get to work, using his knowledge with simple mechanics of ship armoring, and droid armoring in an attempt to make , his beskaram . The design would be simple , his Bucye, or helmet would be full beskar,would contain oxygen filtering, and a comm. His neck would contain beskar chain-mail , in order to allow mobility and some protection, and the ability to take his helmet off without a fuss. Leather would be insulated throughout the body in a form of red cloth interweaving the suit together, these cloth weaves would also have black fabric were the plates would be put inside and secured y durasteel clamps to permanently keep the plates there forever. This was essential to the armor, which would allow for there to be evenly distributed beskar plates in this slots for the armor. There would two chest plates , one for the right pectoral part of the chst and one for the left, allowing for a seperate small seam , the black fabric, to separate the two chest pieces. This would protect the chest muscles and only have a small crack of exposure for the enemy to hit , a blaster , or lightsaber may not be able to do enough damage with such a tight seam, but a thin dagger, or dart could . These were problems that would be unacceptable to the sniper . The purpose of the seams were to allow mobility , and breathing space for the body, giving the warrior the ability to react faster, move faster, and have insulation for temperature.
The most important thing for a sniper was to have air to breath, in order to mask the fluent movement of his rifle , and have perfect breathing for the shot. Not only this , a sniper needed to be exceptionally calm, and less distracted, with insulation; heat, or extreme weather would never get in the way of the snipers ability to move or breath when aiming. This was a smart decision with the small trade back that a knife , or a dart could get through such a small seam, a sniper , a good sniper during combat , usually never had to worry about blow darts or knives, the only targets that could be a problem, where the exceptionally few elite footmen that could get close, the force users, counter snipers, and heavy armored vehicles. A majority , not using the knives or blow darts. While as a bounty hunter this may be a different story, the keshian had eye sight , and athleticism on his side to combat this simple set back. The next place would be the protect of the collar bone area , and the protection of his traps, both important groups of the shoulder. The collar bone would be protected like the neck was, with beskar chain mail, while weaker then plate beskar, it gave the same protection of a energy attacks, but the kinetic force still would be enough to break a bone , the main purpose was to provide even protection and allow mobility so the sniper would not get hit in the first place. Unfortunately this was the best way to go in order to provide this , and follow the combat style of Bryanjar. The traps , on the other hand would be protected like the chest was, with beskar plating of medium thickness, these plates would completely cover the area. Therefore covering the largest group of the shoulder rather then the inside parts of the shoulder closer to the neck which only would be protected by beskar chain mail.
The next area, would be the abdominal area (stomach) , the lower and upper portions of the abdominal area would be protected by a single beskar plate cover a majority of the area, this plate would be of medium thickness as well. The abdominal area, according to research is a prime target , for any combatant, thus instead of having to separate area's like the larger ventral(front) chest area, a beskar plate of medium thickness, and wider length was made to remedy this problem, underneath is the same type of Technic used that the chest plates where placed in. Consisting of a border between the chest area's , and abdominal area's was the black sports fabric, where it again, was a small seam bordering the two different areas. The fabric is durable, but should be cleaned and repaired frequently . This is not a problem as fabric can be found on most planets and morphed for the purpose of serving the armor's needs. This design , contemptuously put together, helps a sniper have breathing capabilities and mobility capabilities with rather then fully plated beskarams.
When one looks at the arms , this is one of the greater weaknesses when it comes to the protections of the individual , but also gives greater mobility to the wearer, red fabric , coated with only leather to protect the individual surrounds the area of the tricep , bicep , this frequently shows off the muscular arms, and size of the warrior , Bryanjar Aulfmaor . Which gives an intimidation factor to any unfortunate bounties the hunter may be after, while also giving mobility, this area of the arm is interwove into the chest piece and is separate from the forearms piece and gauntlets. This joint separation is necessary as to give a way to help dismantle the armor after battle, there is no protection to blaster fire, or lightsabers in this area, only to shrapnel. The next part, the forearms and onward, is a beskar gauntlet , completely beskar, these areas require great athleticism of the hands , and forearms to move the fingers in the gauntlet with lubrication, but in emergencies can be done by the wearer this armor is designed for, if need be. Not only is there ultimate protect in the medium thick piece of beskar making, there are beskar knuckles, designed to be used as a punching weapon should the occasion need be. With brute force, and athleticism, these knuckles can definitely pack a punch to injure , and in certain areas, kill.
Moving back toward the areas near the abdominals is the area beside it, the armpit and down to the hips, the hips have no protection, and so does the armpit area and between, this is to allow mobility and more breath air, and to allow more speed for the combatant. Behind in the intra-scapular areas (middle parts of the upper back bordering the spine) , scapular areas (upper portion of the back) , medial(middle) portions of the scapular, and the lumbar area of the back ( lower back ) are covered by a single medium thick beskar plate. the borders all around are surrounded by the fabric already spoken about.
Now that the process is understood by previous explanations of the upper part, details will be shortened in order to save document space of this file. The quads of the legs and shins will contain beskar plates of medium thickness with the fabric bordering a beskar knee cap for mobility and protection. This allows mobility in the legs while also allow maximal protection of the entire leg except for the seams. The ankles will not be protected allowing mobility and the ability for the wearer to take off the beskar combat boots that will also be apart of this beskaram. Moving forward, the beskar armored boots will be shaped after the famous neocrusaders design for combat wears of the feet , the difference being completely beskar , and less comforting as theres only a small fabric coating insulated inside for comfort. Moving to a more , sexual region of the lower body, the testicles and penis will be protected by a beskar cup, the cup will need to be custom made, due to the size of the individual , in order to allow comfort , and to not cut off bloodflow which would cause urinary problems from the normal size. This cup is visable , while it would be cheaper fto not add this design , the author simply needs protection there like any other part.
The calfs , and hamstrings will also receive as much protection, as the ventral side of the leg has , with a border seperating them of the fabric. The glutenous maximums will not receive any protection , this is to relieve the pressure of all the plating on the legs and to allow for a safe fabricated area in order to pull the lower portion of the armor down after combat. While this beskaram may have many weakness's , there are many strengths that will be issued to the wearer's style in combat , strong, explosive, agile , and constantly moving, when in close quarters. While also serving the purposes of being stationary while fighting afar.
------------------------------------------------------------------------------------------------------------------------------------------
Location : Tatioone, in the isolated dry climate by an abandoned moisture farm.
Bryanjar called the crazy mandalorian knight, a vod during the battle , and practically family. The two of the would lightly spar, to test the armor. The warrior waited , eager to test his gear, and to see how it would fair, if this went well, he would send it back to the company to perfectly build a model of his cosmetic desires , after testing his metal in combat, he deserved this victory, and boy would the keshian enjoy it.
