Stopping Power (Past Thread / Development Thread) *Completed*

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 41​

​

Bits more of information was coming in and it looked good. She continued thinking about cylinder size to fit what size cartridge.​

“Stats for former base design. Bullet diameter 12.7 mm. Neck diameter 13.4 mm. Base diameter 13.4 mm. Rim diameter 14.1 mm. Rim thickness1.4 mm. Case length 41.3 mm. overall length 58.4 mm. Rifling twist 476.25. The primer type is a large pistol. The maximum pressure is 60,000 psi. Normal velocity for the standard round is 2,075 feet per second. Normal energy output for the pistol is 2,868 feet per second. Standard round contain beskar tip. Standard round can penetrate a foot and a half of duracreate at close range. Normal standard rounds can penetrate beskar plating at close range. With muzzle break stats can increase by a full 19%. This appears to be a very nasty weapon.”

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 42​

​

Topic still on the list was cylinders. The sound of fingers still batting away at a key board!​

​

“New bullet diameter would be 27.813 mm. Neck diameters 29.346 mm. Base diameters is 29.346 mm. Rim diameters 30.879 mm. Rim thicknesses 3.066 mm. Case length 7.847 mm. Overall length 11.096 mm. Rifling twist 1042.9875 per second. The primer type is large pistol. Maximum pressure is 71,000 psi. Normal velocity for the standard round is 2077.46925 feet per second. Normal energy output for the pistol is 2871.41292 feet per second. Standard round contains beskar tips. Standard round can penetrate 27.594 inches of deracrate at close range. Normal rounds have a good chance of penetrating armor plates as hard as beskar at close range. Max range 71.4 meters. Close range 25.4 meters.”

Kista still did not have the read out of what this would do to her wrists. For an average human they could take a couple shots without wrist support or proper footing to disperse the recoil. A few shots without wrist support or proper footing could result in breaking the user’s wrist.

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 43​

​

Kista stopped typing for a moment and sat back. She looked at the screen pondering the applications of this blueprint. It could be an equalizer in combat. This pistol would have the stopping power of a heavy sniper rifle without the range. Sniper rifles were notorious for being ineffective at close range. It was too hard to quickly point and shot the rifle. This pistol though, even in a close quarter situation like urban warfare you could quickly pull this pistol out a shot at a target in heavy armor. The pistol’s penetrating power would not be as effective as a rifle but it could in theory have a good chance to penetrate even the heaviest of armors. This was very possible to be a game changer. There was potential here.

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 44​

​

“My, my this is getting interesting”, in a bit of astonishment Kista sounded a bit surprised. “There is some versatility to this application as well.”

Kista flipped up a new bar/window on her computer looking at slug thrower shells. This blue print she was creating was a slug thrower. The variation of a Mandalorian Ripper pistol. They used bullets. There have been many cases already people used a verity of different types of bullets. The type of round that was already set up for this design was an armor piercing round. Working this theory further the round could be make to be a cryo round or even an explosive round. Or Kista could make a formula to make a blue print for a armor piercing round that exploded after impact much like a APEX round for heavy artillery. Kista was easily envisioning a round like this piercing a suit of heavy Sith armor and then detonating after it had sunk into the armor. “That would be pretty sick,YO”, Kista got a wicked smile!

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 45​

​

The steady sound of fingers type still resonated throughout the room. “Ok side mod recap. Future there will be pending research on alternative formulas on ballistic ammo.”

Kista’s eyes looked over the information on the computer, “There will be a slandered cross hair sight on the pistol. Future mod deign for an accessory will be a laser sight attached most likely to the top of the pistol. The house box could be outfitted with tech to link to a HUD system. The link would be the real interesting part. The pistol is a close quarter’s weapon and the HUD system will give greater reaction time as well as some other goodies. Like infrared. With the HUD you could possible see heat patterns on the other side of some soil objects. With the penetrating power of the pistol you could in theory shot people that are behind a wall. That is without saying if the slug would still have enough penetrating power to sink into or through armor worn. Very intriguing!”

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 46​

​

“Kista do you even have a model name for this”, she asked herself even though she knew the answer. “No, you do not”, she answered vocally her own question. “Maybe you should start thinking of one”, she said further as she was running a program to give an actual picture blue print of the weapon design.

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 47​

​

“Still no clue on model name”, Kista kept on typing. The draft for the blue print was turning out nicely. The name of the model type was less important at this stage but she was going to need a name eventually. “Maybe something akin to justice? Maybe something something equalizer? You could just go with a number designation but that would just be boring Kista”, fingers still tapped away working diligently.

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 48​

​

“Stealth applications, zero chance”, Kista actually chuckled at the obvious comment. “It is way too loud to be used in such a way. So there would be no silencer efficient enough to cover up the noise this slug thrower makes. Put that on the list of limitations this weapon has. If you fire it people are going to hear it.”

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 49​

​

Hearing her computer beep Kista looked down at the window app that was flashing. “Look at that the data has finished compiling”, she clicked the window to take a look. “Interesting”, she said while reading the data. “It could do that”, she asked herself being surprised by what she was reading. “A subconscious reactionary base that adjusts movement requirements to adjusting for recoil weapon fire. Good to know”, she flipped the window back over and went back to finishing the blue print design.

 

[Kista Bralor]

[SIZE=18pt]Stopping Power (Past Thread / Development Thread)[/SIZE]​

​

Location: Kista’s Home /Her father’s laboratory​

Time Line: Kista age 14​

Development: Research for a Mandalorian ripper pistol, five slotted cylinder, with 50 caliber rounds.​

Post Count: 50​

​

“Whoop almost there Kista”, she cheered herself on. She was nearly complete. There was not much left for her to do. She still did not have a name for the firearm. It almost seemed fitting to give it a name at the end here. “What were the possible names you came up with? Well, let’s see. Let’s go with Cti’ne Tor”, she finally had a name and a completed blue print for a new pistol line.

 

[Kista Bralor]

[SIZE=20pt]Thread Completed! [/SIZE]​